an attachment for ATVs, UTVs and 6-Wheel Vehicles
that add traction and flotation to a machine. J-wheelz
bolt on to the existing wheel, widening it with a
unique shape that allows it to handle the deepest
mud without affecting the drivability of the vehicle
when on firm ground. This allows the rider to
maintain full steering and speed capabilities of the
machine as well as extends the life of J-wheelz by
keeping them from wearing on the pavement.
J-wheelz consist of a durable Impact resistant
copolymer shell made from materials similar to
plastics used in automotive bumpers which are known
for impact rebound. This material is extremely
durable and rated for temperatures down to -20
J-Wheelz add traction through fixed permanent hubs
as well as flexible rubberized traction blades which
insert into the shell. These blades come in two
different sizes and are replaceable simply by
sliding the blade out the back of the shell when the
unit is uninstalled from your machine. The less
aggressive blades come standard for front wheels to
ensure full steering without any fender clearance
issues. The back wheels come standard with the more
aggressive blades to give you maximum traction.
A closed cell marine grade foam makes up the center
core and also fills the back Ďtire sideí of the J-wheelz.
This foam adds the flotation to J-wheelz and also
ensures J-wheelz will not take on water or fill with
mud. It is puncture resistant, lightweight, and
Because of the care put into material selection, J-wheelz
are the best of all worlds. Weighing in at only 7lbs
each, J-wheelz wonít weigh down a machine, but are
extremely durable. Watch our durability video!
A set of four J-wheelz installed on a machine will
add 310lbs of additional flotation. This is enough
to fully float many stock machines and meets the ATV
Flotation requirements of Dane County, WI.
J-wheelz also provide additional stability for your
ATV on side-slopes and rollover situations. As you
can see in the comparison picture above, J-wheelz
substantially increase the height of the ATVs
tipping point which makes them considerably more
stable in many situations.
Installation is simple. Replace two existing lug
nuts with provided coupler extension nuts. J-Wheelz
then bolt into coupler nuts. There is no need to
jack up your machine or take off your existing tire.
Total time needed to install four J-Wheelz is
between 10-15 minutes. See our Installation Video
for detailed instructions on installation.
J-Wheelz are designed to fit any 23-26 inch tire and
can be used on ATVís, UTVís, and 6-Wheel Vehicles
with any rim diameter. J-Wheelz are made to fit any
standard four-bolt pattern, but specialized fittings
can be created at an additional cost. Contact J-wheelz
for more information.
Call for information about J-wheelz fitment for
almost any ATV now at